Make your own free website on Tripod.com

Home

Phase Locked Loops Programmer

PLL2001 Programmer

PLL Simulator and Programmer


System Requirements:
IBM PC compatible
Windows 16/32 bit or Windows NT operating system
1 MB of RAM, 1 MB of free disk space


Connection to serial programmable PLL-chip's:

Pin PrinterPort                Usage          
2 Data 0 Out to printer PLL Clock
3 Data 1 Out to printer PLL Data
4 Data 2 Out to printer PLL Enable
18 Ground Ground

The connection to Printer port.25-Pin Printer ConnectorConnection to the computers printer port. See Radio interfacing to Printer Port for more information about using PrinterPort.



Connection to parallel programmable PLL-chip's:

Pin PrinterPort                Usage          
2 Data 0 Out to printer P0
3 Data 1 Out to printer P1
4 Data 2 Out to printer P2
5 Data 3 Out to printer P3
6 Data 4 Out to printer P4
7 Data 5 Out to printer P5
8 Data 6 Out to printer P6
9 Data 7 Out to printer P7
18 Ground Ground

The connection to Printer port.25-Pin Printer ConnectorConnection to the computers printer port. See Radio interfacing to Printer Port for more information about using PrinterPort.


Software:
LMX1501A.EXE and install the file under C:\PLL\
MC145157.EXE and install the file under C:\PLL\
MC145158.EXE and install the file under C:\PLL\
MC145159.EXE and install the file under C:\PLL\
PLL02A.EXE and install the file under C:\PLL\
PLL0305.EXE and install the file under C:\PLL\
PLL2001.EXE and install the file under C:\PLL\
PLL2002.EXE and install the file under C:\PLL\
SM5158.EXE and install the file under C:\PLL\

Inpout16.DLL and install the file under C:\WINDOWS\SYSTEM\
VBRUN300.DLL and install the file under C:\WINDOWS\SYSTEM\

Saving files:
PC: Right-click on link and choose "Save File As"
Mac: Click and hold on link and choose "Save File As"


E-Mail: cbradio@wintransceiver.com