Functions:
Frequency range from 25,265MHz to 30,355MHz
5kHz and 10kHz Frequency Step
Step Up and Step Down
Scan Up and Scan Down
Dual Watch
Repeater function (Split)
2 Memory Bank with 100 memories
System Requirements:
IBM PC compatible
Windows 16/32 bit and Windows NT operating system
1 MB of RAM, 1 MB of free disk space
WINJack Software
CB-Radio with PCMA001S Board
Price:
Few components
1 pcs. 25-Pin D-SUB Connector
1 pcs. NULL-Modem Cable
The connection to Printer port.
Install a 25-pin D-SUB Male connector on the radios bottom cover, and use
a NullModem cable to the computers printer port.
See Radio interfacing to Printer Port for more
information about using PrinterPort.
| Pin | PrinterPort | Direction | Usage | Connection to: | Active H/L |
|---|---|---|---|---|---|
| 1 | Data 8 | Out to radio | MC145106 pin 9 | HIGH | |
| 2 | Data 0 | Out to radio | MC145106 pin 17 | HIGH | |
| 3 | Data 1 | Out to radio | MC145106 pin 16 | HIGH | |
| 4 | Data 2 | Out to radio | MC145106 pin 15 | HIGH | |
| 5 | Data 3 | Out to radio | MC145106 pin 14 | HIGH | |
| 6 | Data 4 | Out to radio | MC145106 pin 13 | HIGH | |
| 7 | Data 5 | Out to radio | MC145106 pin 12 | HIGH | |
| 8 | Data 6 | Out to radio | MC145106 pin 11 | HIGH | |
| 9 | Data 7 | Out to radio | MC145106 pin 10 | HIGH | |
| 10 | ACK | In from radio | PTT Switch | Microphone connector Pin 3 | LOW |
| 11 | Busy | In from radio | Squelch Control | Squelch circuit, IC2 pin 8 | LOW |
| 14 | Strobe | Out to radio | Frequency select | MC145106 pin 6 | 10kHz = Low and 5kHz = High |
| 18 | Ground | Ground | MC145106 pin 18 |
| Before modification | After modification |
|---|---|
 To protect the PrinterPort: Cut the trace between IC5 and IC6/IC7.... |
 and insert 9 pcs. 4,7kW resistors across the cutted traces. |
| Connection to the PrinterPort | Squelch and PTT circuit |
|---|---|
 |
Connect a 4,7kW resistor to the SQ-circuit. Use also a 1N4148 or similar diode to protect the input from the PTT-Switch. Connect a wire from PrinterPort pin 14 to MC145106 pin 6 to obtain 5kHz and 10kHz frequency Step. |
Software: